If Your Water Heater Suddenly Stops Working: What to Do

Get Estimate

Just how do you feel with regards to What Would Cause My Electric Water Heater to Stop Working??


What Would Cause My Electric Water Heater to Stop Working?
Numerous modern homes utilize an electric water heater for their furnace, as a result of its benefit as well as simplicity of use. Nonetheless, just like any other electrical home appliances, issues might develop with its usage, all of a sudden. It can be truly aggravating to wake up to a cool shower as opposed to a warm one or having your bath with water that isn't warm adequate and even as well hot. Whatever the instance might be, water heater troubles can be fairly stressful. Thankfully, we've made a checklist of feasible options to your water heater issues. There are a variety of aspects that could create much of these issues, it could be a concern with the power supply, the electrical burner, or the thermostat. Prior to doing anything, guarantee you shut off the major power supply for safety and security. Whatever the trouble is, getting it fixed ought to not pose too much of an issue if you adhere to these actions:

Call A Specialist:


If after changing all faulty parts and also resetting your temperature level, the water heater still isn't functioning, you may require to get in touch with a professional plumber for an expert point of view. The problem with your heating unit could be that the hot and cold faucets have actually been switched over or it may be undersized for the quantity of warm water needed in your house. Whatever the situation might be, a professional plumber would certainly help address the problem.

Examine Your Power Supply:


As standard as this might appear, it is very required. Without sufficient power, your water heater will not operate. So the first thing to do when your water unexpectedly retires is to verify that it isn't a power issue. Inspect if the fuse is burnt out or the circuit breaker tripped. If the circuit breaker is the problem, merely turn it off and on once again. Change any damaged or damaged fuse. Examine the home appliance with power after these adjustments to see if it's currently working.

Check Your Thermostat:


If your water heater still isn't functioning or the water appearing isn't warm enough, you may need to inspect the temperature setups on your top thermostat. Guarantee the breaker is turned off before doing anything. Open up the gain access to panel and also press the red switch for temperature reset above the thermostat. This must aid warm the water. Transform the circuit breaker back on and check if the problem has been solved.

Examine the Burner in the Hot Water Heater:


If it's not a power problem, then try taking a look at your burner if it is still functioning. Test each of your heating elements to be sure the trouble isn't with any one of them. If any of them is defective, replace that component and after that examine whether the warm water is back on.

Conclusion


Water heater issues are not always major. Most of them result from small concerns like a blown fuse or damaged burner. Changing the damaged components need to suffice. Nonetheless, if you are still not able to fix the issue, give a call to your closest plumber to come to get it dealt with.


What To Do If Your Hot Water Suddenly Stops Working


The water heater tripped the circuit breaker


The occasional power surge can sometimes cause your large appliances to trip their circuit breaker. Head to your electrical panel to see if the switch associated with your water heater needs to be reset


Your water heater’s fuel supply has been shut off.


If you own a gas or propane water heater, someone might have closed the gas valve. Without gas, your water heater can’t heat water. Ensure the valve is in the “open” position (parallel to the gas line, as opposed to perpendicular to it). If you smell gas (a “rotten egg” smell) or hear the hissing sound of a gas leak, evacuate your home at once, notify your utility company from a safe distance away, and contact a professional to repair your gas line.


The water heater’s pilot light is out.


Although newer water heaters no longer have pilot lights, it’s commonplace for older gas water heaters to have them. Typically, you can find instructions for relighting the pilot light somewhere on the side of the water heater tank, in the owner’s manual, or in online instructions from the manufacturer. Of course, you can always consult a qualified plumber regarding water heater pilot light issues as well.


There’s a problem with the water heater’s burner.


  • Wait for the burner to turn off. If you have no hot water, it’s probably off already. Once it’s off, set your water heater’s thermostat to 120°F.


  • Go to a faucet and turn on the hot water. Let it continue to run for a minute or so while you check on the burner.


  • Observe to see if the burner ignites. If it does, you can adjust the temperature as needed while the water still runs. However, the Consumer Product Safety Commission (CPSC) strongly recommends a temperature no higher than 120°F to prevent scalding.


  • If your burner does not ignite, there’s most likely a problem with the thermostat. You’ll need a plumbing professional to repair it.


  • The water heater’s capacity is too small.


    If you own a storage tank water heater, sometimes a couple of showers in a row can use up most of the hot water stored in the tank. Then, when it’s time for the next person to shower, they’ll run out of stored hot water partway through and then they'll experience water not getting hot. You have some options:


  • Wait longer before showering so the hot water can “fill up” again.


  • Upgrade to a water heater with a bigger tank.


  • Switch to an on-demand (or tankless) water heater.


  • Do You Have a Faulty Heating Element?


    Hot water is heated by one or more heating elements that are located at the bottom of the hot water heater. Due to sediment cover, these elements become less effective at heating water. Even without sediment buildup, heating elements can become damaged and inefficient after years of regular use.



    In the event that the hot water heater's heating element fails, the water will be lukewarm throughout the home. You can restore hot water to your home by contacting a plumber or hot water heater technician.

    https://www.albrightsmechanical.com/blog/2021/january/what-to-do-if-your-hot-water-suddenly-stops-work/


    What Would Cause My Electric Water Heater to Stop Working?

    Do you enjoy reading about What Would Cause My Electric Water Heater to Stop Working?? Post a remark directly below. We will be pleased to know your reactions about this blog posting. In hopes that you visit us again in the near future. Enjoyed our piece? Please share it. Let another person locate it. Thank you so much for your time spent reading it.


    Schedule A Free Estimate

    Leave a Reply

    Your email address will not be published. Required fields are marked *